Additional Information:
Vellum Printing Tips: Before printing, set your margins and test the type placement by printing copies on white paper test sheets and aligning with vellum over a light source.
Warm up your printer as toner adheres to paper by a heat fusion process. If the printed is not heated up properly or the vellum stock is cold, you may not achieve optimal results. Run another small job first to make sure the machine is properly warmed up.
Use the highest DPI (dots per inch) setting on your printer, 600 or 1200 DPI is best. Verify your printed is not set to Draft mode. Allow several extra seconds "drying time" before handling any printed vellum stock.
|
